BusMaintenance
Please Login
BusMaintenance

Questions and Answers for School Bus Maintenance
 
HomeHome  RegisterRegister  Log in  

Share | 
 

 VT 365 Hard Start

View previous topic View next topic Go down 
AuthorMessage
lakeside



Posts : 27
Join date : 2016-04-20

PostSubject: VT 365 Hard Start   Wed May 11, 2016 5:45 am

any idea's I have a 2006 IC with a VT365 that is hard to start when hot.

already did the air pressure test and changed the injector O-rings, high pressure oil pump, and the oil rail down tub

the lower oil pump was changed on 10.29.15
Back to top Go down
b1



Posts : 56
Join date : 2016-04-07

PostSubject: Re: VT 365 Hard Start   Wed May 11, 2016 7:05 am

What is the ICP pressure when cranking hot and also what codes if any?
Back to top Go down
lakeside



Posts : 27
Join date : 2016-04-20

PostSubject: Re: VT 365 Hard Start   Wed May 11, 2016 12:05 pm

cold 1500, hot 290
Back to top Go down
b1



Posts : 56
Join date : 2016-04-07

PostSubject: Re: VT 365 Hard Start   Wed May 11, 2016 12:34 pm

Go ahead with the injectors but I need you to keep track of each injector comming out by labeling them per cylinder. Do not return the old injectors until I tell you to. After you install the new injectors I want you to post the ICP pressure cold and hot and keep me informed of the situation.
Back to top Go down
lakeside



Posts : 27
Join date : 2016-04-20

PostSubject: Re: VT 365 Hard Start   Wed May 11, 2016 1:32 pm

ok
Back to top Go down
TMORRISSEY



Posts : 4
Join date : 2016-04-18

PostSubject: Re: VT 365 Hard Start   Thu May 12, 2016 6:18 am

WE HAVE THIS IDENTICAL PROBLEM AT LEMONT WITH A VT 365. WE ARE AT THE SAME PLACE ..AIR TEST DONE ETC...
Back to top Go down
b1



Posts : 56
Join date : 2016-04-07

PostSubject: Re: VT 365 Hard Start   Thu May 12, 2016 7:13 am

TMORRISSEY wrote:
WE HAVE THIS IDENTICAL PROBLEM AT LEMONT WITH A VT 365. WE ARE AT THE SAME PLACE ..AIR TEST DONE ETC...


What is the cold and hot ICP pressures and list any codes
Back to top Go down
lakeside



Posts : 27
Join date : 2016-04-20

PostSubject: Re: VT 365 Hard Start   Tue May 17, 2016 2:13 pm

ok after I replaced the injectors cold ICP pressure is 700+ and hot is 600
Back to top Go down
b1



Posts : 56
Join date : 2016-04-07

PostSubject: Re: VT 365 Hard Start   Tue May 17, 2016 2:28 pm

lakeside wrote:
ok after I replaced the injectors cold ICP pressure is 700+ and hot is 600
And did it solve your problem? It should have enough hot pressure now to start.
Back to top Go down
lakeside



Posts : 27
Join date : 2016-04-20

PostSubject: Re: VT 365 Hard Start   Wed May 18, 2016 5:07 am

yes the problem is finally solved
Back to top Go down
b1



Posts : 56
Join date : 2016-04-07

PostSubject: Re: VT 365 Hard Start   Wed May 18, 2016 6:50 am

lakeside wrote:
yes the problem is finally solved
Send those injectors you took out directly to me.
Back to top Go down
lakeside



Posts : 27
Join date : 2016-04-20

PostSubject: Re: VT 365 Hard Start   Wed May 18, 2016 6:55 am

ok
Back to top Go down
Sponsored content




PostSubject: Re: VT 365 Hard Start   

Back to top Go down
 
VT 365 Hard Start
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» do not run browser, when start selenium testing
» start selenium 2 with Internet Explorer.
» Could not start Selenium session: Connection timed out: connect
» How to start SeleniumRC in Java IDE?
» Start Selenium server

Permissions in this forum:You cannot reply to topics in this forum
BusMaintenance :: Bus Maintenance :: Engine Problems-
Jump to: